Replacing an old kitchen faucet is as easy as child’s play. All you need is a set of tools and you will be good to go. You therefore don’t need to call a plumber. In fact, you can finish the job in less than an hour’s time. And by the time you are done, your sink will definitely have a stunning look. If your sink sits on top of a cabinet, you will have to remove all of its contents so that you can get enough space for accessing the area that’s at the base of the faucet. This article will provide step by step guidance on how you can install a new faucet in your kitchen.
- Determine the Type of Faucet to Install
Nowadays most home homeowners prefer to install either a pulling faucet or an automatic faucet. Each type offers unique benefits. A pulling faucet allows you to fill containers that can’t fit into the sink and water plants that are not far. However, it’s nothing when compared with an automatic faucet. This type actually has a sensor that is used to open and close the valves. It prevents the transmission of germs between different people. It’s commonly used in hospitals and restaurants. The downside is that it can give you a run for your money. You should also check how many openings are on the deck of the current faucet. In most cases, you will come across 1 to 4 holes. If you will only need one hole, the rest will need to be covered with a deck that’s provided by the manufacturer. For more insights, please head over to this site.
- Gather Necessary Tools
It’s not possible to replace a faucet when you are not armed with the right tools. For a start, you will need the following fools:
- Adjustable spanner
- Screwdriver
- Pliers
- Plumber’s glue
- Allen Key
If you don’t have the above tools in your toolbox, you should consider renting them from your local convenience store because it’s cheaper than buying them for a single use.
- Turn off the Main Water Source
Replacing an old faucet can be a messy affair if the water supply is not switched off. This is because it will cause the floor below to become slippery. Working on such a surface is due to the fact that you might fall and get injured. Before you get stated, it’s recommended that you locate the main gate valve and switch it off to ensure that you have a safe working area.
- Remove the Old Faucet
The old faucet has to be removed to pave way for the new faucet. You will need to use an allen key to open the screws. Besides that, you will need to open the bolts that are used to fasten the faucet on the deck of the sink. Once this is done, you should proceed by removing the grime that has been left behind. If the old faucet is not rusty, you can keep it for a rainy day.
- Installing the New Faucet
This phase begins by mounting the deck and then sealing it with the valves that are provided by the manufacturer. You might also need to use a plumber’s glue. Once you are through, you should use the Allen key to tighten any loose screws. The nuts beneath the deck will need to be fastened with an adjustable spanner. The flexible water hoses should then be connected to the holes of the faucet. You should then turn on the water slowly so that you can spot any leakage.
Be the first to comment